Filter
Top Products
29
FlashMic Manager Window - Features
Using the default parameter set loaded previously as an example (PSET_1), examine
the various items of information now displayed in the window.
Items marked ‡ are those uploaded to the FlashMic as part of the preset.
Current Config file:
The filename displayed here will be that of the currently loaded configuration file. In
this case, ‘New’ is displayed because the file has not yet been saved.
Preset Information
Select Preset – drop-down box permitting selection of one of the 9 presets making
up the configuration file.
Preset Custom Name ‡ – text box for the name of the preset. This will be displayed
in the FlashMic during power-up (if the preset was the last used before power-
down).
Note that underscore characters are used to insert spaces in the example preset
name, PSET_1.
SAVE
Clicking this button saves the configuration file currently loaded in FlashMic Manager
to the same filename it had when it was opened. If the file has been created from
new (as in the example case), a standard Save File As window for a new filename
will be opened first. The default name offered is Presets.cfg, but the user may
substitute any other filename preferred. Clicking the SAVE button is equivalent to
selecting File>Save, or using the keyboard shortcut CTRL + S.
Preset Configuration
Record Mode ‡ – this drop-down box lets you determine the file type and sample
rate from 6 options:
RECORD
MODE
FILE TYPE
SAMPLE
RATE
MAXIMUM
RECORDING TIME
LIN48K BWF files (uncompressed) 48kHz 3hr
LIN44K BWF files (uncompressed) 44.1kHz 3hr 15min
LIN32K BWF files (uncompressed) 32kHz 4hr 30min
MP48K MPEG1 (Layer 2) files 48kHz 12hr 15min
MP44K MPEG1 (Layer 2) files 44.1kHz 14hr 40min
LIN32K MPEG1 (Layer 2) files 32kHz 18hr 25min