Support User Manuals

Korg 88key Electronic Keyboard User Manual

Open as PDF

of 142

Performing with the Drum Track function Using the Drum Track function in Combination mode

99

Inthefollowingillustration,we’veselectedtimbre5

forusebythedrumtrack.

2. SpecifytheMIDIchannelofthedrumtrack

timbre.

BeawarethatifanothertimbreusesthesameMIDI

channel,thattimbrewillalsobeplayed.

3. AccesstheCombiP7:ARP/DT–DrumTrackpage.

Specifythedrumtrack’sMIDIchannelOutput.Setthis

tomatchtheMIDIChannelofthetimbreyou

specifiedinstep2.

4. SelectaDrumTrackpat

tern.Use“Pattern(Pattern

Bank)”toselectthepresetoruserbank,anduse

“PatternNo.”toselectthepatternnumber.

Note: Ifyouselectanemptypattern,theDRUM

TRACKbutto

nwillnotfunction.

5. PresstheDRUMTRACKbuttontoverifythatthe

patternplayscorrectly.

Themethodoftriggering

willdependontheTrigger

settings.IftheTriggerModeparameterissettoStart

Immediately,theDrumTrackpatternwillstartwhen

youpresstheDRUMTRACKbutton.Fordetailsonthe

Triggersettings,pleasesee“7–4b:Trigger”onpage 56

oftheParameterGuide.

previous next