Filter
Top Products
30
D. MOD (MODULATION) EFFECTS
Here you can select one of 11 modulation-type effects.
*: This indicates a parameter that you can control from the expression pedal.
1. CLASSIC CHORUS (CL CHORS)
This models a chorus unit that has two modes (chorus and vibrato), and is best-
known for being built into a guitar amp.
2. MULTI TAP CHORUS (MT CHORS)
This is a chorus with independent taps for left/center/right, adding depth and spa-
ciousness to your sound.
3. CLASSIC FLANGER (CL FLANG)
A model of a truly classic analogue flanger that “unchained” a highly influential
modern guitarist who many hail as the “godfather of two handed tapping.”
[1] “DEPTH” 0.0–10.0 * Adjusts the modulation depth.
[2] “SPEED” 0.1–10.0[Hz] * Adjusts the modulation speed.
[3] “MANUAL” 1.0–10.0 * Adjusts the center frequency of the sweep.
If DEPTH is set to 10, MANUAL will not func-
tion.
[5] “MODE” 1, 2, 3 Selects the output mode.
1: Mono output.
2: Stereo mode in which the effect is panned
right, and the dry sound panned left.
3: Vibrato mode, in which only the effected
sound is output. Setting MANUAL to 10 will
minimize the delay of the output.
[1] “DEPTH” 0.0–10.0 * Adjusts the modulation depth.
[2] “SPEED” 0.1–10.0[Hz] * Adjusts the modulation speed.
[3] “TIME” 0.0–10.0 Adjusts the delay time.
[5] “MIX” 0.0–10.0 * Adjusts the mix level of the effect.
[1] “DEPTH” 0.0–10.0 * Adjusts the modulation depth.
[2] “SPEED” 0.1–10.0[Hz] * Adjusts the modulation speed.
[3] “MANUAL” 1.0–10.0 * Adjusts the center frequency of the sweep. If
DEPTH is set to 10, MANUAL will not func-
tion.
[4] “RESO” 0.0–10.0 * Adjusts the amount of resonance.
[5] “MIX” 0.0–10.0 * Adjusts the mix amount of the effect.
CONTROL switch
FLN TRIG If you set the FLN TRIG: CONTROL switch
setting to “FLN TRIG,” the LFO will be reset
to the position specified by OFFSET when-
ever you operate the switch.
(p.43 Control
switch settings)