Filter
Top Products
41
IntroductionPanel TourSetupPlayingCreating
and Storing
Effect TypePedals
ESS
Index
MIDI/DIGITAL
Factory
settings
Trouble-
shooting
Spec. TunerAppendix
NOTE: When you change the expression target, the MIN and MAX values will be
initialized.
SETTING THE EXPRESSION TARGET
Here are the items you can set.
When you’ve pressed the EXP/CTL button to make it blink, you’ll be able to set the
following items by turning value knobs 1–3.
NOTE: You can set the above items individually for each program. If you switch to a
different program or turn off the power without saving, any changes you’ve made
will be lost.
Using the same example we described earlier when explaining Quick Assign,
here’s how to assign the expression pedal to control the PITCH parameter of the
PITCH SHIFTER modulation effect.
1. Use the MODULATION selector to select PITCH SHIFTER. So that the effect
will be easy to hear, we’ll initialize the PITCH SHIFTER. If PITCH SHIFTER is
already selected, turn the selector to choose a different effect, and then re-
select PITCH SHIFTER.
NOTE: If you change the effect type of a parameter that is assigned to the expres-
sion target, the target will be initialized to a setting of “--OFF--”. (However, “D/
INPUT”, “R/INPUT” are exceptions.)
HINT: If you’ve set the Pre-effect type to “VOX WAH,” the “P/MANUAL” (wah posi-
tion) will automatically be assigned to expression. If you then set the Pre-effect to a
different type without making any further settings, the target setting will also auto-
matically return to the former setting.
2. Press the EXP/CTL button and the Modulation LED will stop blinking.
3. Use the ▲/▼ buttons or turn value knob 1 to make the name display read “M/
PITCH”. The PITCH parameter of the PITCH SHIFTER effect has now been
assigned to the expression pedal. Also, the icon will appear in the LCD
display.
NOTE: Unlike other parameters, PITCH is not edited when you control it from the
expression pedal. This is so that the pitch will change smoothly even when MIN
and MAX are set to values that are close to each other (i.e., when you’ve made set-
tings so that the pedal produces only a small amount of pitch change).
NOTE: Nothing will be controlled if the target effect is “--OFF--.”
“*/######”: EXP expression target (value display indicates EP) Value knob 1
“EXP MIN”: EXP (expression pedal) target range (minimum value) Value knob 2
“EXP MAX”: EXP (expression pedal) target range (maximum value) Value knob 3