Filter
Top Products
1
Introduction
3. 128 built-in programs
The microKORG contains 128 built-in programs. When shipped, the TRANCE–
S.E./HIT banks contain 112 synth programs, and the VOCODER bank contains
16 vocoder programs.
4. Process the waveform of an external input source
The waveform of an external audio source can be input via the AUDIO IN 1 and
2 jacks, and processed in the same way as the internal waveforms.
5. Virtual Patch function
Modulators and controllers such as filter EG, amp EG, LFO 1/2, keyboard
tracking, and wheel can be virtually patched (without using actual patch cables)
to parameters such as pitch, cutoff, and amp. This gives you even more creative
flexibility.
6. Effects to add the finishing touch to your sound
For even greater possibilities, the microKORG provides three types of modula-
tion effect, three types of delay, and an equalizer.
The delay effect can be synchronized with the arpeggiator or an external MIDI
clock, allowing numerous applications in live performance.
7. Step Arpeggiator
The microKORG's arpeggiator lets you produce an arpeggio simply by holding
down a chord.
You can choose from six arpeggio types, and adjust the duration and spacing of
the arpeggiated notes. You can also specify whether a note will be on or off for
each of up to eight steps, letting you create a broad range of modified rhythms
and other effects.
Main Features
1. Analog modeling synthesizer
The analog modeling system of the microKORG uses DSP technology to
simulate an analog synthesizer. Starting with a variety of different oscillator
algorithms (such as the sawtooth and square waves familiar to users of analog
synthesizers) you can use the various controls located on the front panel to edit
any sound, or to create sounds of your own. All sound parameters are organized
into “sections”. By selecting the appropriate section and turning the appropriate
knob you can edit sounds quickly, easily and intuitively. You can also modify the
sound in realtime as you perform.
Number of timbres: maximum 2 (when layer is used)
Maximum polyphony: 4 voices
Structure: 2 oscillators + noise generator: sawtooth wave, square wave,
triangle wave, sine wave, Vox wave, DWGS x 64, Noise,
Audio In (eight types)
PWM function, OSC Sync function, Ring Mod. function, OSC
Sync+Ring Mod. function
Multimode filters: -24 dB/oct LPF, -12 dB/oct LPF, -12 dB/
oct BPF, -12 dB/oct HPF (four types)
Filter EQ, Amp EG, LFO1, LFO2 (LFO: six waveforms, can be
synchronized to the arpeggiator or to external MIDI clock)
2. Vocoder
You can connect a mic to one of the microKORG's AUDIO IN 1 jacks, and use it as
a vocoder – a device that imposes the spectral character of a voice (or other audio
signal) on the sound of an oscillator, producing the impression that the oscillator is
speaking.
The vocoder consists of eight channels (sixteen filters used in pairs). In addition to
simulating the sounds of classic vocoder units, you can change the filter frequency
and adjust the level and pan of each band to create original vocoder sounds.
Maximum polyphony:
4 voices
Structure:
8 channel vocoder, adjustable level/pan for each channel,
Formant Shift function, 1 oscillator + noise generator (eight types)
Filter EG, Amp EG, LFO1, LFO2 (LFO: six waveforms, can be
synchronized to the arpeggiator or to external MIDI clock)