Filter
Top Products
26
20: Approximately 20 seconds.
40: Approximately 40 seconds.
80: Approximately 80 seconds.
1, 2, 3…: Number of measures.
If the recording mode is “JAM,” the recording quality
will be set automatically, based on the tempo and the
specified number of measures.
If you select a long recording time (40 or 80), the audio
quality of the recording will be lower.
If the recording mode is “JAM” and the tempo of the rhythm
is extremely slow, it will not be possible to record a large
number of measures. Please adjust the tempo in Rhythm &
Bass mode (maximum length is approximately 80 seconds)
If you want to use Chain in Rhythm & Bass mode to record
a one-measure rhythm pattern etc. in “JAM“ mode using
multiple patterns, specify the number of recording mea-
sures to be the number of patterns you're using. For exam-
ple if you want to use two patterns of a 2/4 time signature
to record a one-measure pattern of a 4/4 time signature,
specify 2 measures as the number of recording measures.
Start playback on your CD or other audio source, and at
the point where you wish to begin recording, press the
ENTER/REC button. Recording will begin.
You can use a foot switch connected to the FOOTSW jack
to start/stop recording (☞p.34 “FOOTSW”).
If the recording mode is “JAM,” recording will begin af-
ter precount.
If, after recording, you want to change the recording mode
or recording time, press the PHRASE TRAINER button
while playback is paused.
Recording
When you begin recording, the recording time will be indicat-
ed as a numerical value.
Recording time
When you want to stop recording, press the ENTER/REC
button, the ® CURSOR, or PHRASE TRAINER button.
Recording will stop, and loop playback will begin auto-
matically. If you do not stop recording, recording will con-
tinue until the selected recording time or number of mea-
sures has elapsed, and loop playback will begin automat-
ically.
The phrase will be recorded and played back in mono.