Filter
Top Products
42
Synth parameters
DEPTH (GAIN/MID) Adjusts the amount of change in the filter cutoff frequency (-15...0…15).
DECAY (BASS) Adjusts the decay time of the filter envelope (0.0…10.0).
WAVE (TREBLE) When GSYNTH1–3 is selected
Selects the waveform (0…15).
0: Sawtooth wave, two octaves down 1: Sawtooth wave, one octave down
2: Sine wave, one octave down 3: Sawtooth wave
4: Sine wave 5: Sawtooth wave, one octave up
6: Sine wave, one octave up 7: Sine wave, two octaves up
Oscillators 8–15 are oscillators 0–7 but with portamento turned on.
When BSYNTH1–3 is selected
Adjusts the waveform (0.0…10.0). A setting of 0 is the same octave as the original
sound. A setting of 10.0 is a waveform one octave below, and intermediate values
adjust the mix between the two waveforms.
SYN LEV (VOLUME) Adjusts the synth volume (0.0…10.0).
DIR LEV (Value encoder) Adjusts the guitar or bass volume (0.0…10.0).
The guitar synth (GSYNTH1–3) is effective with single-note playing. It will not produce the correct result if you play chords.
The bass synth (BSYNTH1–3) will produce muddy sound if you play chords.
The guitar synth (GSYNTH1–3) will not produce the expected result if your instrument is tuned incorrectly. If this occurs,
please tune your instrument correctly.
If the sound is unpleasantly distorted, lower the “SYN LEV” and “DIR LEV” until the sound is no longer distorted.