Filter
Top Products
28
Edit mode
In this mode you can turn each effect on/off, and edit
the effect type, parameter values, and program name.
In Play mode, press the ® CURSOR to access the DYNA
effect edit screen. Renaming the program and writing
the program are also performed here.
Select the effect that you wish to edit
Each time you press the √/® CURSOR, you will cycle
through the effects in the order shown below. When an
effect is selected, its icon will blink.
(Delay time)
Editing each effect
For each effect, you can select the effect type and change
its parameter values.
Effects that are turned “OFF” will automatically be
turned on if you press the ENTER/REC button or use
the π/† CURSOR to select the effect type. If a program
was not written after it was edited, the decimal point of
the program number will light.
In any screen of Edit mode, you can use the Control dials
to edit the Amp models, or use the TAP/BYPASS button
to set the delay time.
For details on the effect types and parameters, refer to
the Effect Parameters list (☞p.37).
Press the EXIT button to return to Play mode.
The edited settings will return to the settings of the orig-
inal program if you switch programs or turn off the pow-
er without Writing (☞p.31 “WRITE”).
DYNA: Dynamics & Pickup Modeling
These are dynamics-type effects such as compressor,
auto-wah, and pickup modeling effects.
On, Off
Parameter
value
▲/▼: Type selection