Filter
Top Products
Lexicon
Lexicon Part #070-08342 Rev 1
Printed in the United States of America
Lexicon, Inc.• 3 Oak Park Bedford, MA 01730 USA Tel 781-280-0300 Fax 781-280-0490
Acknowledgements
The CP-3 is manufactured under license from Dolby Laboratories Licensing Corporation. Additionally licensed under one or more of the
following patents: U.S. numbers 3,632,886, 3,746,792 and 3,959,590; Canadian numbers 1,004,603 and 1,037,877. "Dolby" and the double-
D symbol are trademarks of Dolby Laboratories Licensing Corporation.
The CP-3 is manufactured under license from LucasArts Entertainment Company. "THX" and "Home THX Cinema" are trademarks of
LucasArts Entertainment Company.
"Auto-Azimuth" and the A-Z logo
are trademarks of Lexicon, Inc.
Copyright ©1991 Lexicon. Inc.
All Rights Reserved.
Lexicon Patent: U.S. no. 4, 862, 502; other patents pending on the CP-3.
Unpacking and Inspection
After unpacking the CP-3, save all packing materials in case you ever need to ship the unit. Thoroughly inspect
the CP-3 and packing materials for signs of damage. Remove the adhesive protective film from the CP-3 front-
panel lens. Report any shipment damage to the carrier at once; report equipment malfunction to your dealer.
AUTO AZIMUTH
Precautions
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This triangle, which appears on
your component, alerts you to
important operating and main-
tenance instructions in this ac-
companying literature.
This triangle, which appears on
your component, alerts you to
the presence of uninsulated,
dangerous voltage inside the
enclosure... voltage that may be
sufficient to constitute a risk of
shock.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THE UNIT TO RAIN OR MOISTURE.
WARNING:
DO NOT DEFEAT OR REMOVE
GROUND PIN ON THE POWER PLUG.