Filter
Top Products
33
CP-3 Digital Surround Processor
Customization
To rename any mode, press the STORE button. The display reads:
STORE MENU
>STORE THIS MODE
SET MODE NAME.
Move the cursor to select "SET MODE NAME". The PARAM button will
now move the cursor to one of twelve available spaces in the display, while
PARAM ▲ and ▼ cycle through the available list of characters, beginning
with the one currently occupying the space.
At this point an underline character appears in the bottom row of the LCD
display. (On the on-screen display, one of the characters of the current name
will flash.) The cursor will move to the leftmost character of the mode name.
Now push PARAM ▲ or ▼ until the character you want appears in the
space. (Holding either button for one second activates an auto-repeat mode
to speed you through the list.) All letters are available, in upper case, as are
digits 0-9, a blank space and an assortment of other characters. When the
first space in the display is correct, press PARAM, use PARAM ▲ and ▼ to
set the second character and repeat until the new name is complete.
Press SETUP to return to the Store menu. Use PARAM to select "STORE
THIS MODE", then use PARAM ▲ and ▼ to step to the register where you
want this mode stored. Once you have selected a location, press STORE.
Note that, if you have renamed a Preset, you must store the newly-named
mode in a User register in order to have your change saved.
Renaming a mode