Filter
Top Products
19
Owner’s Manual
Owner’s Manual
5. BOOTH LEVEL
This knob adjusts the output level at the booth out-
puts [10].
5. BOOTH STEREO/MONO
With this switch up, the booth [10] outputs provide a
stereo left and right output of the main mix.
If you only have one booth monitor, push the switch in
to combine the left and right signals to mono.
54. ZONE LEVEL
This knob adjusts the output level at the zone [11]
outputs.
55. MAIN LEVEL
This knob adjusts the main mix output level at the
main out XLRs [12].
It also adjusts the RCA main outs [14] but only when
the live/record [15] switch is out.
This control does not affect the main meters [57], or
the phones [51], booth [10], or zone [11] outputs, or
the FireWire outputs.
5. PAN
This knob adjusts the stereo balance of the main mix
at the main out XLRs [12].
It also adjusts the RCA main outs [14] but only when
the live/record [15] switch is out.
This control does not affect the main meters [57], or
the phones [51], booth [10], or zone [11] outputs, or
FireWire outputs.
57. MAIN LEVEL METERS
These meters indicate the signal strength of the main
mix outputs before the main level or pan controls.
You want to see the signals bouncing between the “0”
and the “+6” LEDs. It is okay if the OL LEDs at the top
light occasionally, but if they light frequently or continu-
ously, turn down the program faders [38] until they
blink occasionally, or not at all.
DJ STAR
Press this imaginary button to link up directly to tech
support telepathically through your headphones.
TAKE A BREAK
It’s time for a nice cup of tea and a cheese sandwich.
You deserve it, as not many people read owner’s manuals
past page 3.
The next few pages contain the following Appendices:
Appendix A shows service and repair information.
Appendix B is a section on audio connectors.
Appendix C shows the specs and a block diagram.
Appendix D shows how to replace the crossfader.
Appendix E shows FireWire details.