Filter
Top Products
|
11
KeyStudio 49i User Guide
KeyStudio 49i Macintosh Driver Installation
10
M-Audio driver installation is not required in order to use KeyStudio 49i with the GM Module software on your Macintosh
OS X computer. These drivers are however, required for Pro Tools M-Powered use.
NOTE: Disconnect your KeyStudio 49i keyboard from your computer until the appropriate driver files have been copied to your
hard drive. Be sure to leave your KeyStudio 49i disconnected until instructed to connect it below.
1. Download the most recent KeyStudio 49i Macintosh drivers by going to the Support > Drivers page at www.m-audio.com.
2. Double-click the file once it has finished downloading.
3. Follow the driver installer’s on-screen instructions. During Installation, Mac OS X will ask you to enter your user name and
password. Enter this information and click OK to confirm. If you have not configured a password for your computer, leave
the password field blank and click OK. If you are not the computer’s owner, ask the owner or your Administrator for the
missing information.
4. Click “Close” once the installer has completed the installation and connect your KeyStudio 49i keyboard to your
computer using the USB cable provided.*
5. Your KeyStudio 49i is now ready to use.
*The single USB cable not only powers the keyboard but also sends MIDI data to and from your computer system.