M-Audio 49I Electronic Keyboard User Manual


  Open as PDF
of 41
 
|
5
KeyStudio 49i User Guide
Minimum System Requirements
5
Standalone
Standalone operation refers to using KeyStudio without a computer. An optional 9V, 500mA center-positive power supply (sold
separately) is required for standalone operation.
Bus-Powered
In this mode of operation, KeyStudio is connected to a PC or Mac with a USB cable. When using the KeyStudio 49i with your
computer, your computer system must meet the following minimum specifications.
M-Audio KeyStudio 49i Hardware
and GM Module Software:
Windows XP (SP2)*
•Pentium
®
III 1GHz or AMD K7
Athlon 1GHz
(CPU may be higher for laptops)
•512MBRAM
•OnenativeUSBport
•350MBfreeharddiskspacefor
GM Module
•CD-ROMdriveforinstallationof
GM Module
*Home and Professional Edition only.
Windows Media Center Edition is not
currently supported.
Windows Vista 32-bit
•Pentium
®
III 1GHz or AMD K7
Athlon 1Ghz
(CPU may be higher for laptops)
•1GBRAM
•128MBGraphicsCard
•OnenativeUSBport
•350MBfreeharddiskspacefor
GM Module
•CD-ROMdriveforinstallationof
GM Module
Mac OS X
•MacintoshG41GHz†
•OSX10.3.9with512MBRAM
•OSX10.4.9with512MBRAM
•OnenativeUSBport
•350MBfreeharddiskspacefor
GM Module
•CD-ROMdriveforinstallationof
GM Module
†G3/G4 accelerator cards are not
supported.
M-Audio suggests you also check the minimum system requirements for any software applications you plan on using with your new
M-Audio hardware, as they may be greater than the above.
Important: Connect your Headphones or powered speakers to KeyStudio 49i. Sounds created by KeyStudio and from software
used with it will be available at the audio outputs on KeyStudio 49i (and not on the outputs of your computer’s built-in soundcard).
 previous next