Filter
Top Products
User Guide24 DCP-300
Using the Reverb Effect
The built-in digital Reverb can be used for adding a natural-sounding room ambience to any of the 16 voices
built into DCP-300.
‣ To apply Reverb to a voice:
Press the Reverb button.
The button will illuminate, and you will
hear the Reverb effect when you play the
currently selected voice.
To turn Reverb off, press the Reverb button
again. The button will go dark to indicate
that Reverb is off.
‣ To adjust the Reverb Depth (Reverb amount):
While holding the Reverb button,
turn the Data Control knob to
adjust the Reverb Depth setting.
The LCD will show the current
Reverb Depth setting. The
minimum setting is 0, and the
maximum setting is 127.
Once you have reached the desired
amount of Reverb, let go of the
Reverb button, and resume playing
DCP-300.
Function
REVERB
Function
REVERB
Note: If you prefer, you may use the Tempo Up/Down
buttons instead of the Data Control knob to change
the Reverb Depth (while holding down the Reverb
button).
✔