Filter
Top Products
User Guide 57DCP-300
Reverb and Chorus Defaults
No. Sound Name Reverb
On/Off
Reverb
Depth
Reverb
Type
Chorus
On/Off
Chorus
Depth
Chorus
Type
0 Grand Piano On 40 4 Off 64 2
1 Bright Piano On 40 0 Off 50 3
2 E. Piano 1 On 35 1 On 35 2
3 E. Piano 2 On 38 1 Off 35 3
4 Vibes On 35 4 Off 40 2
5 FM EP On 50 4 On 40 2
6 Rock Organ On 48 1 Off 64 1
7 Church Organ On 96 5 Off 50 3
8 Harpsichord On 50 0 Off 35 2
9 Clav On 35 1 On 45 4
10 Strings On 54 4 Off 35 2
11 Choir On 127 4 Off 50 1
12 Fantasia On 64 4 Off 45 1
13 Warm Pad Off 40 4 Off 35 2
14 Upright Bass Off 35 6 Off 35
3
15 Electric Bass Off 35 0 On 45 1
MIDI
Channel 10
n/a
(Metronome)
Off Off
Piano Reset
As soon as the Piano Reset function is activated (by pressing the Reverb and Chorus buttons
simultaneously), the device will perform the following functions:
1. Turn Local On
2. Send ‘All Notes Off’ Command on MIDI Channel 1 - external and to the internal sound engine
3. Send ‘Reset All Controllers’ Command on MIDI channel 1 - external and to the internal sound
engine
4. Assign Data Control to MIDI Controller 7 (Volume)
5. Set Volume levels for Main Voice, Split Voice and Layer Voice to defaults
6. Set Pan to 64 for Main Voice, Split Voice and Layer Voice
7. Turn off Layer Mode and Split Mode
8. Set Global Transmit Channel to 1
9. Set Transpose and Octave Shift both back to zero
10. Send a Bank Change MSB = 0 and Bank Change LSB = 0 on channel 1
11. Send a Program Change = 0 on channel 1
12. Send the Reverb Depth back to the default value for the Piano Voice
13. Send the Chorus Depth back to the default value for the Piano Voice
14. Send the current status of the Sustain Pedal on channel 1
The device will remain in Performance Mode during the Piano Reset function. The LCD display
will show ‘Piano Reset’ for 1 second and then return to the default display.