M-Audio DCP-300 Electronic Keyboard User Manual


 
User Guide8 DCP-300
Connections Panel
MIDI
Out
1
2
USB
Input
Level
Aux In
Heaphones
Line Out
13 1814 15 16 17
13. Headphone Outputs – Plugging a set of headphones into Headphone Output number 1 will disable
the output from the internal speakers, allowing you to play without disturbing others. Plugging
headphones only into the second (bottom) headphone output will not affect the speakers.
14. MIDI Output – This standard 5-pin MIDI connector sends MIDI output signal, for connecting to a
computer or external MIDI device.
15. USB Connector – This is a standard USB 1.1 connector, for connecting to a computer’s USB port.
16. Aux Line In – These RCA connectors allow you to mix an external sound source (such as a CD player or
computer output) with the piano’s internal sounds, for playback through the piano’s built-in speakers
or headphone outputs.
17. Line Out – These RCA connectors can be used to connect the output of the piano to a stereo sound
system,keyboardamplier,mixingconsoleoraudiorecorder.TheleveloftheLineOutputisnot
affected by the Master Volume slider.
18. Aux Input Level – This adjusts the input level of the signal connected to the Aux Line Inputs.
Rear Panel
AC100-240V – 50/60HZ
PEDAL
CAUTION
19 20
19. Power Socket – Connect the included 3-pin AC cable here, and plug the other end into an active AC
outlet.
20. Pedal Connector – Connect the pedal board here.