Filter
Top Products
User Guide40 DCP-300
Function
CHORUS
TOUCH
Master Tune
Although DCP-300 never actually slips out of tune, the Master Tuning function can be helpful when playing
along with another instrument that may be tuned slightly higher or lower than standard pitch.
‣ To adjust the Master Tune setting:
Press the Chorus and Touch buttons at the
same time.
The top line of the LCD will show:
MasterTune: -0-
Use the Data Control knob (or the Transpose
Up/Down buttons) to raise or lower the Master
Tune setting.
‣ To reset the Master Tune value to its default value of zero:
Press the Chorus and Touch buttons at the
same time to enable the Master Tune function.
Press the Transpose up and down buttons at
the same time.
1
1
2
2
Note: Changes to the Master Tune value are remembered
after a power cycle.
Also note that the Master Tune command is sent to the
internal sound engine only. It will not affect MIDI sent from
DCP-300 to an external MIDI device or software program.
✔
Function
CHORUS
TOUCH