M-Audio 49 Electronic Keyboard User Manual


  Open as PDF
of 24
 
|
5
KeyRIg 49 User Guide
Installation and Setup
6
The KeyRig 49 USB keyboard is class-compliant. This means that you may simply connect the provided USB cable between KeyRig
49 and your Windows XP or Mac OS X computer and switch the keyboard on. Additional drivers are not mandatory for normal
operation.
As you become more familiar with KeyRig 49, you may wish to take advantage of this product’s professional features such as: using
yournewkeyboardwithmorethanoneapplicationatthesametime(multi-client)orsendingadvancedMIDImessagesusingKeyRig
49’sEditmode.WhenusingWindows,someofthesefeaturescanonlybeaccessedafterinstallingtheoptionalKeyRig49drivers.
NodriversarerequiredforMacOSX.TheoptionalPCdriversarefoundontheKeyRig49CD-ROMincludedwiththispackage.
PLEASE NOTE: If you are installing the optional drivers for KeyRig, disconnect your KeyRig until you are instructed to
connect it.
To install the optional Windows XP drivers for KeyRig 49:
1.InserttheKeyRig49CD-ROMintoyourcomputer’sCD-ROMdrive.
2.Thecomputerwillautomaticallydisplaytheinteractiveinstallscreen.Ifyourcomputerfailstolaunchtheinstaller,
manually start it by clicking on Start > My Computer > KeyRig 49.
3.ChooseKeyRig49keyboardfromthepulldownmenuandclick“Install.”
4. Follow the driver installer’s on-screen direction prompts.
5. At various points in this installation process, you may be notified that the driver being installed has not passed
WindowsLogoTesting.Click“ContinueAnyway”toproceedwithinstallation.
6. Click“Finish”oncetheinstallerhascompletedtheinstallation.
7. Connect your KeyRig 49 to an available USB port using the cable provided.
8. Makesurethatthepowerswitchonthebackofthekeyboardisinthe“on”(I)position.
9. YouwillbeaskedifyouwanttosearchtheInternetforadriver.Select“No,notthistime”andclick“Next.”
10. Windows will display a Found New Hardware Wizard.
11.Choose“Installthesoftwareautomatically,”andclickNext.
12.Followtheon-screendirectionpromptsandclick“Finish”whentheFoundNewHardwareWizardhascompleted.
 previous next