Filter
Top Products
3.
Position the cursor under
DP;
use the
right
or lefe
arrow
button. Use the V and A buttons to select the
preset to dump
via
MIDI.
4. Press the Exec button to send the preset. The following display is shown:
(Loading a preset to its original location does not require a procedure. Simply
send
the preset from the
transmitting unit. The Tube Fex will automatically store it in its original location.)
1. Press the Global button until you get to the MIDI screen.
2. Position the cursor under RC; use the
right
or left arrow button. Use the V and A buttons to change
the channel over which MIDI messages are received. (Make sure the sending unit is set to transmit on
the
cliannel selected.)
R
p
I;.
I..]
r:
h
=
1
CMIDII
F;IC
TC
TP DP LP
[=I5
LS,
3.
Position the cursor under
LP;
use the
right
or left arrow button.
LJse
the V and
A
buttons to select the
preset to receive via MIDI.
4.
Now send the preset to the Tube Fex from the transmitting unit.
You
should
SW
the following display:
If you see:
You need to:
c*
Set the receive channel on the Tube Fex to the MIDI channel shown in the
clispl;~y.
I*
Send the preset again from the transmitting unit.
Tutorials
33