Filter
Top Products
Hum Filter
(HF)
The Hum Filter effect is effective in removing the A.C. line noise from a signal.
Parameter
Fq:
The
Fq
(Frequency) parameter selects between an AC line frequency. Select either
60Hz
(IJ5.A.)
or
50Hz
(European).
Coil Tap
&‘T,l
The Coil Tap effect is a special digital filter which can be used to emphasize or
de-emphdsize
harmonics.
Parameters
FLJ
When the phase parameter is set to a positive number, the
Fq
(Frequency) parameter controls the
amount of harmonics being emphasized. When the phase parameter is set to a negative number,
the harmonics are de-emphasized. Range is
1-
10.
Ph:
The
Ph
(Phase) parameter is used to select the emphasis or de-emphasis of harmonics. Setting the
Phase to a positive number will emphasize harmonics, while setting the Phase to a negative
number de-emphasizes the harmonics. Range is
k100.
Exciter
(EX)
The
Exciter effect uses a “distortion technique” to add harmonics.
in a
distorted sound, but instead produces an exciter effect.
Using this technique does not, in fact, result
Parameters
DC
The Dr (Drive) parameter setting determines the amount of harmonics added. Range is 0 (no
harmonics) to 100 (maximum harmonics).
Tk
The Tu (Tune) parameter controls the amount of emphasis. Range is
O.lK
(excites lower
frequencies) to 4.9K (excites higher frequencies).
ly.
The
Ty
(Type) parameter is used to select between three different distortion types which
product
three different sounds. Range is
1-3.
Type 1 adds even
han-nonics,
type 2 adds odd harmonics,
type
3
adds even and odd harmonics.
Ku.
The Ba (Balance)
parameter
is used to set the balance. Range is 0 (direct) to 100 (excited).
Appendix A
Individual Effects A-73