Filter
Top Products
Pitch 1 and Pitch 2
(PI
and
P2)
In order to allow stereo pitch shifting yet still have a pitch shifter available which does not use a large amount
of effect space, we have developed a pitch shift effect with a panning input and independent left and right
mix
control. This effect is the only one that can be used in two locations in the chain
sim~lltanet,usly,
thus
allowing true stereo and independently controllable pitch shifting on each channel.
By placing two pitch shifters in parallel or series, and setting their inputs and mix levels panned to opposite
sides, independent stereo detuning will be available.
Parameters
I/l:
The In (Input) parameter controls the left/right input pan.
PD:
The
PD
(I?eDelay
)
parameter allows up to
46
milliseconds of delay before the pitch transposition
begins. This creates a doubling or chorusing type sound. Range is
O-46ms.
Pt:
The
Pt
(Pitch) parameter is used to select large amounts of transposition in half‘ step increments.
Range is
&
12
(
1 octave).
0:
The
Ct
(Cents) parameter is used to fine tune the transposed pitch when necessary. Range is
*SO.
(‘,/2
step is 100 cents)
Fb:
The Fb
Weedl>ack>
parameter controls the amount of output signal that is sent
llack
to the input
of the
I’rcDelay.
This can be used to create climbing or descending pitch type. Range is O-99%.
LX5
The LM
(Left
Mix) parameter controls the direct/effect
mix
to the output of
the
effect
for
tile
left
output channel. Range is 0400%.
Rrz%*
The
RM
(Right Mix) parameter controls the direct/effect
mix
to the output of the effect
li)r
the right
output channel. Range is 0400%.
A-10
Appendix A individual Effects