Filter
Top Products
p.19
mono input module
level meter features
level meter
Each input includes a five-segment LED meter for visu-
ally monitoring signal levels.This is essential for setting up and maintaining proper
gain structure.
peak indicator—PK
The input signal is monitored at several points throughout the channel.
These points are the mic preamp, the EQ stage and the fader stage. Overloads at
any of these stages will cause the red peak-LED to light.
Then the channel gain should reduced.
signal level LED’s
These three LED's light up at +8—yellow, 0—green,and -6 dB—green.This
level range -6 to +8 is the optimum operating range. Compressed or relatively
constant signals should remain close to 0.
signal present indicator—SIG
This green-LED varies in brightness in response to signal levels between -40
dB and -6 dB.
LED
LED
LED
LEDLEDLEDLEDLED
Occasional flashing of the
peak LED is acceptable,
but frequent flashes indi-
cate that channel levels
must be lowered.
®
1