Filter
Top Products
p.93
6
microprocessor control
Mute controller
I)Recall (Next)
Each press of this switch increments the Sequenced Mutes by one, the dis-
play (B) will reflect this.Also used to activate the displayed Scene when an
Up/Down (A) button was used to scroll to a new Scene. In this case, an "*"
will be displayed as the first character in the display to indicate that the dis-
played number is not currently the active Scene. Pressing Recall will put that
displayed Scene into place and clear the "*" from the display.
NOTE:All of the above actions will take place, but the displayed Sequenced
Scene will not be active (mutes not enabled) unless the Micro Scene switch
(G) is lit. Each press of these switches increments or decrements the Patch
Display (B). Holding either button down will allow quickly scrolling up or
down.The buttons are also used to select the parameters and settings of
the system while in Utility mode.