Filter
Top Products
115
Various Other Settings
Various Other Settings
Transmission of PC (Program Change) numbers can be
switched ON/OFF.
1.
Press the [Utility] button.
2.
Press the Menu [ ] or [ ] button to select
“MIDI.”
3.
Press the [Rec] button.
4.
Press the Menu [ ] or [ ] button to select
“Send PC Switch.”
fig.12-25
5.
Press the Value [-] or [+] button to switch the
Send PC Switch “ON” or “OFF.”
To return to the basic screen, press the [Utility] button.
This setting remains stored in memory even while power is
turned off.
You can specify the Program Change number that will be
transmitted from MIDI Out when a Registration is selected.
1.
Press the [Utility] button.
2.
Press the Menu [ ] or [ ] button to select
“MIDI.”
3.
Press the [Rec] button.
4.
Press the Menu [ ] or [ ] button to select
“PC Number.”
fig.12-26
5.
Press the Menu [ ] or [ ] button to select
“Bank MSB,” “Bank LSB,” “PC Num.”
6.
Press the Value [-] or [+] button to change the
setting.
To return to the basic screen, press the [Utility] button.
Specifying Transmission of PC
Numbers (Send PC Switch)
Setting
Descriptions
ON
PC numbers are transmitted.
OFF
PC numbers are not transmitted.
Setting PC Numbers (PC Number)
Menu
Setting
Bank MSB (Bank Select MSB) 0–127
Bank LSB (Bank Select LSB) 0–127
PC Num (PC Number) 1–128
AT-100-300_e.book 115ページ ２００８年５月７日 水曜日 午後３時３３分