Filter
Top Products
37
Selecting and Playing Sounds
Selecting and Playing Sounds
The pitch of the sound played by the keyboard can be adjusted in one-octave
steps. This function is called “Octave Shift.”
You can apply an Octave shift to the following 4 Parts:
The Upper Part
The Lower Part
The Pedal bass Part
The Solo Part
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to select “Octave
Shift.”
f
3.
Press the [Rec] button.
4.
Use the Menu [ ] and [ ] buttons to select a Part to
which you wish to apply an Octave Shift.
fig.02-16
5.
Use the Value [-] and [+] buttons to set the amount of shift.
The value can be set to a range of +/- 3 octaves.
To return to the basic screen, press the [Utility] button.
Transpose the Pitch in Octave Units (Octave Shift)
Part
Pedal, Lower, Upper, Solo
NOTE
Please note that when you
apply the Octave Shift function
to certain voices, their pitch
could be stretched beyond their
recommended note ranges, and
they may not sound as
expected. Care should be taken
when using Octave Shift.
AT-100-300_e.book 37 ページ ２００８年５月７日 水曜日 午後３時３３分