Roland AT-100 Electronic Keyboard User Manual


 
33
Selecting and Playing Sounds
Selecting and Playing Sounds
Adding Sparkle to the Sound (Percussion)
This adds an attack sound to the beginning of the note, making the sound
crisper.
1.
Press the Percussion [2 2/3'] button so its indicator is lit.
Play the Upper keyboard and notice that an attack has been added.
Adjusting the Rate at which the Percussion Decays
You can shorten the decay time of the percussion sound.
1.
Press the Percussion [Fast Decay] button to switch the
indicator between lit/unlit.
Using the Harmonic Bar Settings of the Panel
If you’ve switched registrations so that the Vintage Organ settings have
changed, you can switch the Vintage Organ settings to the positions (settings)
of the harmonic bars on the panel.
1.
Press the H-Bar Part [Upper] or [Lower] button whose
indicator is lit.
The part whose indicator is lit will have the settings of the harmonic bar
positions (settings) of the panel.
Button
Explanation
Percussion [2 2/3'] button
Percussion one octave and a fifth above
[Fast Decay] Button
Explanation
Lit
The percussion sound will disappear quickly.
The percussion will have a sharper attack.
Unlit
The percussion sound will disappear slowly.
The percussion will have a more gentle attack.
NOTE
When the Percussion [2 2/3']
button is on, the 1' pitch will
not be produced.
NOTE
The Percussion [2 2/3'] button
are valid only for vintage organ
voices of the upper part.
AT-100-300_e.book 33 ページ 2008年5月7日 水曜日 午後3時33分