Filter
Top Products
38
Selecting and Playing Sounds
You can have the sound for keys in the Lower keyboard continue to play, even
after you release the key, until the next key is pressed.
1.
Hold down the Pedal [To Lower] button for several seconds
until its indicator begins blinking.
The following appears in the screen.
The notes played on the lower keyboard will continue sounding.
2.
Press the Pedal [To Lower] button so its indicator goes out.
The sound stops playing.
You can use the Lower keyboard to play various drum sounds (drum set). In
this case, the Lower voices will no longer sound.
fig.02-18
1.
Press the [Drums/SFX] button (indicator lights).
Play the Lower keyboard and listen to the various drum sounds on each key.
The [Drums/SFX] button will alternate between on (lit) and off each time it is
pressed.
Sustaining Notes Played on the Lower Keyboard
Playing Drums from the Entire Lower Keyboard (Drums/SFX)
Pedal [To Lower] button will
also turn on at this time.
This setting is saved to the
registration.
Refer to for “Voice & Rhythm
List” (Appendix: separate
booklet) details on which drum
sound or Sound Effect will be
played by each note.
AT-100-300_e.book 38 ページ ２００８年５月７日 水曜日 午後３時３３分