Filter
Top Products
KR-11 Owner’s Manual—Playing with accompaniment (Arranger)
28
2.
Select the part whose volume you wish to adjust
using the buttons below the display.
3.
Adjust its volume with the <▲> and <▼> buttons.
Press the <▲> button to increase the volume, and the
<▼> button to decrease it.
Volume of the Drums, SFX, Lower, Upper,
or Layer Tone
These are the parts you can play yourself, which is why
you need to press the other Part Volume button.
1.
Press the Part Volume [KEYBOARD] button.
For each part, a bar graph and numerical value are dis-
played on the screen.
The correspondence between the parts and what is
shown on the screen is as follows:
<Drs/SFX>— Drums and SFX (sound effects)
<Lower>— Lower
<Layer>— Layer
<Upper>— Upper
2.
Use the buttons below the display to select the part
whose volume you wish to adjust.
3.
Use the <▲> and <▼> buttons to adjust the vol-
ume.
7.6 Switching Style
arrangements (divisions)
For each Style, you can select the particulars of the
orchestration (arrangement) and accompaniment
pattern type. You can do this before starting a Style, or
during playback of the Style.
Note: There are other Arranger functions you can use by
assigning them to a PAD button. See “Performance Pad
buttons: additional or frequently used functions” on
page 46.
Basic/Advanced: Level
At power on, the “Advanced” level is selected.
Advanced— more complex arrangement with more
accompanying instruments.
Basic— simple arrangement with fewer accompany-
ing instruments.
Here is how to select the desired level:
Press <Advnc√Basic> or <Advnc®Basic> on the
Basic screen.
The correspondence between the levels and what is
shown on the display is as follows:
Original/Variation: Accompaniment
pattern
There are two kinds of accompaniment patterns: Orig-
inal and Variation. The accompaniment pattern type
is set to “Original” when power to the instrument is
turned on. See “What is an Arranger?” for details.
Press <To Variation> or <To Original> on the Basic
screen.
<Advnc
√
Basic>
Appears when Basic Arrangement is
selected. Press <Advnc
√
Basic> to switch to
the Advanced level.
<Advnc
®
Basic>
Appears when Advanced Arrrangement is
selected. Press <Advnc
®
Basic> to switch to
Basic level.
KR-11_Book Page 28 Thursday, November 21, 2002 9:35 PM