Filter
Top Products
47
KR-11 – Pedal functions
ENGLISH
ENGLISH ENGLISH ENGLISH
Basic/Advanced— This has the same effect as pressing
<Advnc√Basic> or <Advnc®Basic>.
Simple Intro/Ending— This function allows you to
select the simple version of an Intro or Ending at the
press of a button.
Melody Intelligence— This has the same effect as the
[MELODY INTELLIGENCE] button.
Arranger Intro/Ending— This has the same effect as
the [INTRO/ENDING] button.
Arranger Start/Stop— This has the same effect as the
[START/STOP] button.
Fade In/Out— This function allows you to fade in
(the volume gradually increases) when the Arranger is
started, or to fade out (whereby the volume gradually
decreases) at the end of your song.
Chorus ON/OFF— This switches the Chorus effect
for the Whole or Upper Tones on or off.
Rotary Speed Fast/Slow— This changes the speed of
the Rotary effect.
DSP ON/OFF— This switches the DSP effect on or
off.
Glide— When the button assigned to this function is
pressed, the pitch drops momentarily, then gradually
rises to its original level. This is effective when used to
play an instrument like the Hawaiian guitar.
Composer Play/Stop— This has the same effect as the
Composer [PLAY] and [STOP] buttons.
Metronome ON/OFF— This switches the metronome
on or off.
Punch In/Out— When you select this function, you
can activate and deactivate the recording process dur-
ing playback. See page 36 for details.
11.3 Pedal functions
You can also assign other functions to left pedal (Soft).
1.
On the Basic screen, press <Pad/Pdl>.
2.
Press <Page>.
3.
Use <▲> and <▼> to the side of the display to
select the functions of the SOFT footswitch.
In addition to the following functions, all functions
listed under “Pad buttons: additional or frequently
used functions” can be assigned to either footswitch.
Soft for Upper— The footswitch acts as Soft pedal
(affecting the Upper Part or the Whole Part).
Sostenuto for Upper— The pedal acts as Sostenuto
pedal (affecting the Upper Part or the Whole Part).
Damper for Lower— The footswitch acts as separate
Damper pedal for the Lower part.
Bend Up— Select this function if you want to use the
left pedal to shift the pitch of the notes you are playing
upward. The interval (range) can be set using the
Pitch Bend Range parameter (see page 49). To shift a
“C” to the “G” note above the C, set Pitch Bend Range
to “7” and select “Bend Up”. “Bend Up” is probably
what you will use most of the time.
Bend Down— Select this function if you want to use
the left pedal to shift the pitch of the notes you are
playing downward. The interval (range) can be set
using the Pitch Bend Range parameter. To shift a “C”
to the “G” note below the C, set Pitch Bend Range to
“5” and select “Bend Down”.
After a few seconds, the display returns to the previous
screen.
Note: When you press the One Touch Program [PIANO]
button, the pedals once again assume their normal func-
tions (Soft and Sustain).
KR-11_Book Page 47 Thursday, November 21, 2002 9:35 PM