Filter
Top Products
51
KR-11 – Utility functions
ENGLISH
ENGLISH ENGLISH ENGLISH
Music Assistant Arranger Update
You can also set when the Arranger’s settings will
change after you have selected another Music Assistant
memory (see page 45).
1.
On the Utility Menu screen, press <√√PAGE> or
<PAGE®®> to select the following display page:
2.
Use the buttons to the left and right of the display
to select an option.
Instant— Arranger-related settings are called up as
soon as the memory is selected.
Delayed— Arranger-related settings are only recalled
if you hold down the soft button assigned to the
desired Music Assistant memory.
Note: All other programmable settings will be selected
immediately.
Memory Backup
Some settings return to their initial values when the
power is switched off. The Memory Backup function
makes it possible to save such settings so that they
don’t revert to their initial values.
The following settings can be saved:
• Basic screen and Demo screen language
• Stretch Tuning, Temperament
• Octave Shift
• Types and depth of DSP effects for each Tone
• Chorus effect on/off status for each Tone
1.
On the Utility Menu screen, press <√√PAGE> or
<PAGE®®> to select the following display page:
2.
Press <Execute>.
3.
Press <OK>.
Note: To stop the operation, press <Cancel>.
Note: Do not turn the instrument off until the display shows
“Backup complete”.
This returns all settings stored in the KR-11 to their
initial values when shipped from the factory.
Note: The Music Assistant memories also return to their
initial settings, so be sure to save them to disk first.
1.
On the Utility Menu screen, press <√√PAGE> or
<PAGE®®> to select the following display page:
2.
Press <Execute>.
3.
Press <OK>.
All settings are returned to their initial values.
Note: To cancel the operation without initializing the
KR-11, press <Cancel>.
Note: Do not turn the instrument off until the display shows
“Reset complete”.
Link to 16TRK Sequencer
Link is a function you may need when working with
the 16-track Sequencer. It allows you to establish a
connection between the selected Composer track (in
16-track Sequencer mode) and the keyboard, so that
the keyboard triggers the same Tone as the one
assigned to the track.
Normally, such as when taking advantage of the
Minus-One facility, it is wiser to set Link to Off. Doing
so means that you can select whichever Tone you like
for the part you play. If Link is set to On, the keyboard
uses the Tone assigned to the track you select, thereby
overruling you own selection.
1.
On the Utility Menu screen, press <√√PAGE> or
<PAGE®®> to select the following display page:
2.
Use the buttons to the left and right of the display
to switch Link on or off.
Factory Preset (initialization)
KR-11_Book Page 51 Thursday, November 21, 2002 9:35 PM