Roland R-1 Musical Instrument User Manual


 
66
List of messages
This section lists the most important messages that appear in the display.
Display
Explanation
The batteries have run low. Please replace them with
fresh batteries.
The HOLD switch is turned on.
The R-1 is connected via USB to your computer.
No memory card (CompactFlash) is inserted.
There are no MP3 or WAV files on the memory card.
The time shown is the elapsed time.
STOP: stopped
PLAY: playing
Recording-standby mode
The screen shows the name of the file created by this re-
cording.
Press the REC button or PLAY button to start recording.
Status while recording
The screen shows the name of the file created by this re-
cording, and the remaining time that can be recorded.
The recordable time will depend on the capacity of the
memory card.
* remain: remaining time for recording
Name and type of file being recorded
This screen will appear if you press the DISPLAY button
during recording.
Name and type of file that has been recorded
This screen will appear if you press the DISPLAY button
while playing or stopped.
Playback status
The time shown is the remaining playback time for this
song.
* remain: remaining playback time
Playing repeatedly between points A-B
The screen shows the name of the currently playing file
and the elapsed time.
Playing at half-speed
The screen shows the name of the currently playing file
and the elapsed time.
The R-1 is executing a command. Do not remove the
card.
R-1_egfis1.book 66ページ 2005年11月11日 金曜日 午後5時13分