Filter
Top Products
96
Chapter 6. Changing Various Settings
■
Enjoying Karaoke with
Commercial CDs (Center Cancel)
You can minimize the vocal portions of commercial audio
CDs or audio files and sing these parts yourself.
This is a handy way to enjoy karaoke and practice your
singing with your favorite audio CDs or audio files.
NOTE
You may find that using Center Cancel reduces the tone
quality of some songs.
1.
Place the CD you want to play back in the CD
drive.
2.
Select the song you want to play (p. 28).
3.
Press the [Function] (Exit) button so the indicator
is lit.
4.
Press the [Song] (Select -) button or [ ] (Select
+) button to display the CD/AUDIO screen.
fig.06-110d
5.
Press the [Song] (Select -) button or [ ] (Select
+) button to get the value for “Center Cancel” to
flash.
fig.06-121d
6.
Press the [ ] (Value -) button or [ ] (Value
+) button to switch Center Cancel on or off.
7.
When you have finished making the settings,
press the [Function] (Exit) button so the indicator
goes out.
8.
Press the [ ] button.
The song on the CD plays back.
When the song is played, sounds including the melody
and vocals are temporarily minimized.
NOTE
With some songs, the vocals may not be eliminated
completely.
* Center Cancel is cancelled (switched off) when you switch to a
different song.
9.
Press the [ ] button once more to stop
playback of the song.
■
Switching VIMA CD-ROM
Recommended Tones
Songs on VIMA CD-ROMs (VIMA TUNES) are programmed
with “recommended tones” suitable for each song.
When you select a song, the recommended tones are
assigned to the RG-3M’s Tone buttons, and those Tone
buttons then flash.
When you press a flashing Tone button, the recommended
tone is then selected, enabling you to perform the selected
song using a tone matched to that song as it plays back.
You can set the RG-3M so that the recommended tones are
automatically assigned (On) or not assigned (Off).
→
You can use the Memory Backup function to store these
settings to the RG-3M (p. 75).
1.
Press the [Function] (Exit) button, getting its
indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select
+) button to display the MISC screen.
fig.06-141d
3.
Press the [Song] (Select -) button or [ ] (Select
+) button to get the value for “Recommended
Tone” to flash.
fig.06-142d
4.
Press the [ ] (Value -) button or [ ] (Value
+) button to switch the recommended tone setting
on or off.
This is set to “On” at the factory.
5.
Press the [Function] (Exit) button so the indicator
goes out.
Value
description
On
The sounds of the melody and vocals are
minimized.
Off
Center Cancel is disabled.
Value
Description
On
The recommended tones are automatically
assigned to the RG-3M’s Tone buttons.
Off
The recommended tones are not used, and
only the RG-3M’s internal tones can be se-
lected.
RG-3M_e3.book 96 ページ ２００８年３月２５日 火曜日 午前１０時１分