Filter
Top Products
21
Using the RMP-5 with Additional Pads
5.
If necessary, press the [+] or [-] button to make fine adjustments to the trigger type
parameters.
Press the [METRONOME] or [COACH] button to select the parameter, then press the [+] or [-]
button to set the value.
6.
Press the [START/STOP] button to return to the normal screen.
7.
Set the pad sound.
While referring to
“Changing the Sounds Assigned to the Pad”
(p. 10), set the sound for the
pad.
What is the trigger type?
Trigger types are groups of parameters whose values are pre-adjusted for each type of
pad. When you select the trigger type, these parameters are automatically set to the
proper values, you can make fine adjustments to individual parameters for the pad if
you want it to respond differently.
For more detailed information
about each parameter, refer to
the “Parameter List” (p. 23).
RMP-5_e.book 21 ページ ２００５年８月１１日 木曜日 午後２時４７分