Filter
Top Products
8
Setting Up Studio Package Pro
3.
Connect MIDI and other devices as necessary.
For details on the signal flow when using the MIDI connectors of the SI-24, refer to
“MIDI Ctrl:
OFF”
of the SI-24 Owner’s Manual.
If your MIDI file contains large amounts of system exclusive messages, the SI-24 may
be unable to process the messages correctly.
MIDI IN/OUT channels 1 are used for remote control of SONAR. If you use MIDI
IN/OUT, please use channels 2–16.
Step 3: Driver Installation
* The explanations in this manual include illustrations that depict what should typically be shown by the
display. Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g.,
includes newer sounds), so what you actually see in the display may not always match what appears in the
manual.
■
Windows 98
1.
After installing the RPC-1 in a PCI slot, start up your computer.
2.
The RPC-1 will automatically be detected, and the “Add
New Hardware Wizard” will start up. Click “Next.”
3.
Insert the included “Drivers/Update CD-ROM” into your
CD-ROM drive.
4.
Choose “Search for the best driver for your device.
(Recommended).” and click “Next.”
When you turn on the power, turn each device on in the following order.
1. Computer
2. SI-24
3. Audio equipment