Filter
Top Products
Creating a Drum Kit
21
Adjusting the Amount of
Ambience for Each Pad (SEND)
You can adjust the amount of ambience (the send level)
for each pad.
1. Access the AMBIENCE screen as described in
steps 1–3 of the basic procedure (p. 19).
2. Press the [F3] (SEND) button.
The AMBIENCE SEND screen will appear.
3. Press the [F1] (LINK) button to turn Link on/o.
4. Select a pad, either by striking that pad or by
pressing the [F2] ( ) or [F3] ( ) buttons.
The cursor will move to the pad you selected.
Move the cursor within the screen.
If you press the [F1] (LINK) button to make the Link icon
light (on), the parameters of the head and rim (for a
cymbal, the bow and edge; for a ride cymbal, the bow,
edge, and bell) can be edited simultaneously.
If this is o, each can be set independently.
Link icon
Indication in the
screen
Pad
K Kick
S Snare
T1–T3 Tom 1–3
HH Hi-hat
C1, C2 Crash 1, 2
RD Ride
AUX
Pad connected to the AUX jack
MFX
Ambience send amount from MFX
5. Use the value dial to specify the amount of
ambience (send level).
Value 0–100
6. Press the [EXIT] button several times to return to
the DRUM KIT screen.
Turning the Multi-Eect On/O for
Each Pad (SWITCH)
You can specify whether the multi-eect will be applied
to each pad (on) or not applied (o).
1. Access the MULTI-FX screen as described in steps
1–3 of the basic procedure (p. 19).
2. Press the [F3] (SWITCH) button.
The MULTI-FX SWITCH screen will appear.
3. Press the [F1] (LINK) button to turn Link on/o.
4. Select a pad, either by striking that pad or by
pressing the [F2] (
) or [F3] ( ) buttons.
The cursor will move to the pad you selected.
For details on the screen, refer to the explanation of the
AMBIENCE SEND screen (p. 21).
5. Use the value dial to turn the eect on/o.
6. Press the [EXIT] button several times to return to
the DRUM KIT screen.