Filter
Top Products
Creating a Drum Kit
24
7. Press the [F3] (PASTE) button.
If you’re pasting a pad, the paste operation will occur at
this point.
If you’re pasting a drum kit, a conrmation screen will
appear.
* If you decide to cancel, press [F1] (CANCEL).
8. Press the [F3] (OK) button.
The contents of the clipboard will be overwritten onto
the paste-destination.
9. Press the [EXIT] button several times to return to
the DRUM KIT screen.
Saving a Drum Kit to a USB
Flash Drive
Here’s how you can save a drum kit to your USB ash
drive.
Saving a Drum Kit
1. Connect your USB ash drive (p. 9).
2. Make sure that the drum kit you want to save is
selected.
3. In the DRUM KIT screen (p. 11), press the [MENU]
button.
The KIT MENU screen will appear.
4. Press the cursor buttons ( / ) or the [MENU]
button to scroll the screen, and press the [F3]
(SAVE/LOAD) button.
The 1 KIT SAVE/LOAD screen will appear.
5. Press the [F1] (SAVE) button.
The 1 KIT SAVE screen will appear.
6. Use the cursor buttons ( / ) or the value dial to
specify the save-destination.
7. Press the [F3] (SAVE) button.
* If data already exists at the save-destination, a
conrmation screen will appear.
Press the [F3] (OK) button to execute the save
operation. If you decide to cancel, press the [F1]
(CANCEL) button.
The drum kit you selected in step 2 will be saved to your
USB ash drive.
When the data has been saved, the screen will indicate
“Completed” and return to the DRUM KIT screen.