Filter
Top Products
Settings for the Entire TD (SYSTEM)
35
Overall Settings for the TD (Options)
For details on the procedure, refer to “Basic procedure” (p. 34).
Parameter Value Description
Display Contrast 1–10
Adjusts the contrast of the display.
MEMO
In the DRUM KIT screen, you can adjust this by holding down the [MENU] button and
turning the value dial.
Display Brightness 1–10 Adjusts the brightness of the display.
Illumination Ring
You can make the ring of the value dial light up in synchronization with your performance.
OFF The ring will not light.
DYNAMIC The ring will light according to the dynamics of your playing.
KICK The ring will light when you play the kick drum.
TEMPO The ring will light in synchronization with the tempo setting.
Illumination Kit Buttons
You can make the [DRUM KIT] buttons light up.
OFF The [DRUM KIT] buttons will not light.
ON The [DRUM KIT] buttons will light.
Auto O
When shipped from the factory, the TD is set to automatically power-o when 30 minutes have elapsed since
it was last played or operated. Approximately ve minutes before the power turns o, a message will appear
in the display.
OFF The power will not turn o automatically.
10 MINS The power will turn o automatically when 10 minutes have elapsed.
30 MINS The power will turn o automatically when 30 minutes have elapsed.
4 HOURS The power will turn o automatically when four hours have elapsed.
USB Audio Volume 0–100
Adjusts the volume when using the TD to listen to audio data played back from your
computer.
Write Protect OFF, ON If the Write Protect setting is ON, it will not be possible to save any settings.