Sony SRP-X500P Music Mixer User Manual


 
SRP-X500P RS-232C Interface Manual
LEVEL (2nd byte)
The level for each fader can be specified (in dB units).
The parameter and the level are as shown in the following table.
Level Level Level
- 0x30 (‘0’) -20.0 0x40 (‘@’) -4.5 0x50 (‘P’)
-70.0 0x31 (‘1’) -19.0 0x41 (‘A’) -4.0 0x51 (‘Q’)
-60.0 0x32 (‘2’) -18.0 0x42 (‘B’) -3.5 0x52 (‘R’)
-55.0 0x33 (‘3’) -17.0 0x43 (‘C’) -3.0 0x53 (‘S’)
-50.0 0x34 (‘4’) -16.0 0x44 (‘D’) -2.5 0x54 (‘T’)
-45.0 0x35 (‘5’) -15.0 0x45 (‘E’) -2.0 0x55 (‘U’)
-40.0 0x36 (‘6’) -14.0 0x46 (‘F’) -1.5 0x56 (‘V’)
-35.0 0x37 (‘7’) -13.0 0x47 (‘G’) -1.0 0x57 (‘W’)
-32.5 0x38 (‘8’) -12.0 0x48 (‘H’) -0.5 0x58 (‘X’)
-30.0 0x39 (‘9’) -11.0 0x49 (‘I’) 0 0x59 (‘Y’)
-27.5 0x3A (‘:’) -10.0 0x4A (‘J’)
-25.0 0x3B (‘;’) -9.0 0x4B (‘K’)
-24.0 0x3C (‘<‘) -8.0 0x4C (‘L’)
-23.0 0x3D (‘=‘) -7.0 0x4D (‘M’)
-22.0 0x3E (‘>‘) -6.0 0x4E (‘N’)
-21.0 0x3F (‘?’) -5.0 0x4F (‘O’)
Example
To set the REMOTE fader 1 to 0 dB
0x43 0x4C 0x56 0x4C 0x42 0x59 0x0D
(‘C L V L B Y CR’)
2.1.8 REMOTE FADER LEVEL PARAMETER REQUEST : 0x52 0x4C 0x56
0x4C (‘RLVL’)
This command is used to read the master volume and REMOTE fader level settings from the SRP-X500P.
Packet format
0x52 0x4C 0x56 0x4C 0x0D
Return packet format
When the SRP-X500P receives the command successfully, the parameter is returned together with an ACK
(0x41 (‘A’)) in the order shown below.
0x41
parameter” 0x0D
Page 11/43