Filter
Top Products
control giving adjustment of -10dB to +20dB.
36. EQUALISATION
Each pair of Effects Returns is provided with a 2-band
shelving EQ section giving +/- 15dB boost and cut.
37. FOLDBACK SENDS
Two pre-fade controls feed the Effects Return signals to
FB1 and FB2 busses in mono.
38. FX PAN
The PAN control determines the contribution each Ef-
fects Return signal makes to the stereo Mix.
39. FX FADER
A stereo rotary fader provides overall master level con-
trol for the Effects Return.
40. PFL
This operates in the same way as (29) above.
41. FX TO GROUP
The Effects Return Signal may be routed in stereo to
the pair of Groups immediately below it by pressing the
FX to GRP switch.
42. FX TO MIX
The Effects Return signal may be routed to the stereo
Mix by pressing the FX To MIX switch.
MASTER SECTION
43. MIX OUTPUTS
The LEFT and RIGHT outputs are standard
1
⁄
4
" 3 pole
A gauge jack sockets, driven by ground-compensated
output amplifiers.
Page 19