Filter
Top Products
Tape Send with +20dBu @ Group out < 0.006%
CrosstalkCrosstalk Measured 1kHz sine wave
Routing Isolation (Mix L/R & Group) > 100dB
Max. Fader Attenuation > 86dB Typical
Max. Aux Send Attenuation > 89dB Typical
Channel Pan to Group Isolation > 76dB
Channel ON Switch Isolation > 100dB
Monitor ON Switch Isolation > 100dB
FX Return to Mix > 100dB
FX Return to Group > 85dB
Frequency ResponseFrequency Response Measured 20Hz to 20kHz Bandwidth, Relative to 1kHz
Mix Left/Right Outputs +/- 0.5dB
Mono Output +/- 1dB
Aux Outputs +/- 0.5dB
Input & Output ImpedancesInput & Output Impedances
Microphone Input 2kΩ
Line Input 10kΩ
Insert Sends 75Ω
Insert Returns 10kΩ
Outputs 75Ω
Input & Output LevelsInput & Output Levels Mic Input Maximum Level +10dBu
Line Input Maximum Level +30dBu
Mix Out Maximum Level +21dBu
Mono Out Maximum Level +21dBu
Aux Out Maximum Level +21dBu
MeteringMetering 16 Segment LED Bargraph
Selectable PEAK or AVERAGE Reading
Accuracy Relative to 0dB +/- 1dB
Page 34