SoundCraft Audio Mixing Console Model Spirit Studio Musical Instrument User Manual


 
Glossary
auxiliary send an output from the console comprising a mix of signals fro
m
channels and groups derived independently of the
main stereo/group mixes. Typically the feeds to the
mix are implemented on rotary level controls.
balance the relative levels of the left and right channels of a
stereo signal.
Channel Path the section of the input channel which accepts normal inp
u
sources and feeds them to selected groups or stereo
mix under the control of the linear channel fader.
clipping the onset of severe distortion in the signal path, usually
caused by the peak signal voltage being limited by the
circuits power supply voltage.
dB (decibel) a ratio of two voltages or signal levels, expressed by the
equation dB=20Log
10
(V1/V2). Adding the suffix u de-
notes the ratio is relative to 0.775V RMS.
DI(direct injection) the practice of connecting an electric musical instrument
directly to the input of the mixing console, rather than
to an amplifier and loudspeaker which is covered by a
microphone feeding the console.
equaliser a device that allows the boosting or cutting of selected
bands of frequencies in the signal path.
CARE OF YOUR MIXER
General PrecautionsGeneral Precautions Avoid storing or using the mixer in conditions of exces-
sive heat or cold, or in positions where it is likely to be
subject to vibration, dust or moisture.
Keep the mixer clean using a soft dry brush, and an oc-
casional wipe with a damp cloth or ethyl alcohol. Do
not use any other solvents which may cause damage
to paint or plastic parts.
Avoid placing drinks or smoking materials on or near
the mixer. Sticky drinks and cigarette ash are frequent
causes of damage to faders and switches.
Regular care and inspection will be rewarded by a
Page 29