Filter
Top Products
BASIC OPERATION
BASIC PLAYBACK
TO PLAYADISC
1. Press the STANDBY button on the machine to
turn on the unit.
2. Press the FUNCTION button on the machine or
the remote control until LOADING appears on the
LCD of your Singing Machine.
3. Press the Open/Close button on the unit to open
disc compartment.
4. Place the disc in the compartment with the printed
side facing toward you.
5. Press the Open/Close button on the unit to close
disc compartment
Press the PLAY/PAUSE button to start playing the
disc.
For some discs, playback will start from the first
chapter or track of the disc automatically.
TITLE
Press the PLAY/PAUSE to resume playback. The
playback resumes from the same point the STOP
button is pressed.
1. Pressing the STOP button again after the disc
stops playing will clear the location index stored in
memory.
DVD - Playback starts from the beginning of the
current title.
CDG/CD - Playback starts from the beginning of
the disc.
2.
1. Press the STOPbutton.
2. Press the Open/Close button on the unit to open
the disc compartment.
3. Remove the disc from the compartment.
4. Press the Open/Close button on the unit to close
the disc compartment
Pressing master volume buttons +/- on the remote
control or on the unit can adjust the volume of the
audio output.
NOTE:
When playing an MP3 or JPG picture CD pressing
STOP will not maintain a memory because there
is no index location stored.
6.
NOTE:
CAUTION:
NOTE:
NOTE:
NOTE:
1.
2. When you playback a DVD a title menu is
recorded, it may appear on the screen. In this
case, refer to “ ” section.
Keep your fingers away from the disc tray
as it is closing. Neglecting to do so may
cause serious personal injury.
1. Press the STOP button to stop the disc from
playing. A blue screen with The Singing Machine
logo will appear on your TV screen. “Press the
play button to continue” the picture will appear on
the TV screen.
2.
For DVD disc: Pressing PRE or NEXT
button can go to the next or previous chapter on
the disc.
2 For CDG/CD/MP3 disc: Pressing NEXT or
PRE button will enable you to go to the next or
previous track on the disc.
1. When PRE button is pressed once during
normal playback of DVD, the chapter being
played will be played from the beginning.
2. Input the index of the chapter or track by pressing
the NUMBER buttons during the normal
playback, the playback will go to that chapter or
track directly.
1. During normal playback of a DVD, CD or MP3,
press the FWD button to fast forward and press
the REV button to fast reverse.
2. Each time you press either button it will change
the playback speed. The following sequence will
appear on screen.
FWD: 2X 4X 8X 16X Normal Play (It will
not display on screen)
REV: 2X 4X 8X 16X Normal Play (It will
not display on screen)
The rate and direction of playback is indicated on
the display.
3. Press the PLAY button to return to normal
playback.
1. This function is not available for CDG and JPG
picture CD discs.
2. The Singing Machine omits the subtitle and mutes
sound during fast forward or fast reverse mode.
3. The speed of the fast forward or fast reverse may
differ depending on the disc.
1. Press the PLAY/PAUSE button during playback.
2. Press the PLAY/PAUSE button again to resume
playback.
1. This function is available for all discs.
2. The sound is muted during this mode.
TO STOP PLAYINGADISC
TO REMOVEA DISC
TO GO TO NEXT AND PREVIOUS
CHAPTER/ TRACK
TO PLAY IN FAST REVERSE OR FAST
FORWARD
TO PAUSE PLAYBACK (STILL MODE)
VOLUME CONTROL
1.
.
aaa aaa
aaa
aaa
aaa
BEFORE PLAYING
!
!
Please check the “Playable Discs” to confirm the disc being used is playable.
Confirm the Singing Machine is connected to the component/s properly and the power of the Singing Machine
and the other component/s are on.
E23
ENGLISH