Filter
Top Products
1. Read Instructions
2. Retain Instructions
3. Heed Warnings
4 Follow instructions
5. Cleaning
6. Attachments
7. Water and Moisture
8. Accessories
9.
10. Ventilation
11. Power Sources
12. Grounding or Polarization
Alternate Warnings
13. Power-Cord Protection
14. Protective Attachment Plug
15. Outdoor Antenna Grounding
16. Lightning
17. Power Lines
18. Overloading
19. Object and Liquid Entry
20. Servicing
21. Damage Requiring Service
22. Replacement Parts
23. Safety Check
24. Wall or Ceiling Mounting
25. Heat
- All the safety and operating instructions should
be readbefore the productis operated.
- The safety and operating instructions should
be retained forfuture reference.
- All warnings on the product and in the operating
instructions shouldbe adhered to.
. - All operating and use instructions should be
followed.
- Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning theexterior only.Do NOTattempt to cleanthe inside.
- Do not use attachments not recommended by the
product manufactureras they maycause hazards.
- Do not use this product near water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement,or near aswimming pool, andthe like.
- Do not place this product on an unstable cart, stand
tripod, bracket, or table. The productmay fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the product
should follow the manufacturer's instructions, and should use a
mounting accessoryrecommended by themanufacturer.
A product and cart combination should be moved with care. Quick
stops, excessive force,and uneven surfaces maycause the appliance
and cartcombination to overturn.
- Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to
protect it fromoverheating, and theseopenings must notbe blocked or
covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided.
- This product should be operated only from the type
of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery
power, or othersources, refer tothe operatinginstruction.
- This product may be equipped with a
polarized alternating current line plug (a plug having one blade wider
than the other).This plug willfit into thepower outlet only oneway.This
is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not defeat the
safety purposeof the polarizedplug.
- This productmay be equipped with athree-wire
grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety
purpose ofthe grounding-type plug.
- Power supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
product.
- The product is equipped with an
attachment plug having overload protection. This is a safety feature.
See Instruction Manual for replacement or resetting of protective
device. If replacement of the plug is required, be sure the service
technician has useda replacement plug specifiedby the manufacturer
that hasthe same overloadprotection as theoriginal plug.
- If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna-
discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements
for thegrounding electrode. Seefigure:
- For added protection for this product during a lightning
storm, or whenit is leftunattended and unused forlong periods oftime,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and
power-line surges.
-An outside antenna systemshould not be located inthe
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
- Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of fire or
electric shock.
- Never push objects of any kind into this
product through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock.
Never spillliquid of anykind on theproduct.
- Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Referall servicing toqualified service personnel.
- Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
a) When thepower-supply cord or plug is damaged,
b) If liquid has beenspilled, or objects havefallen into theproduct,
c) If theproduct has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the
product toits normal operation.
e) If theproduct has beendropped or damagedin any way, and
f ) When the product exhibits a distinct change in performance -
this indicatesa need forservice.
- When replacement parts are required, be sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
- Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine thatthe product isin proper operatingcondition.
- The product should be mounted to a wall
or ceilingonly as recommendedby the manufacturer.
- Theproduct should besituated away from heatsources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART250. PARTH)
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC-NATIONALELECTRICALCODE
S2898A
E2
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH