Filter
Top Products
21
1. EJECT - Opens and closes the disc tray.
2. DISPLAY - Enable the onscreen track information.
3. N/P - Switches between PAL and NTSC video modes. To
change video modes press the N/P button until desired mode
is selected.
4. SUBTITLE - Turns on subtitles for DVDs with subtitles available.
NOTE: Not all DVDs have subtitles available.
5. ANGLE - For viewing multiple angles on a DVD with multiple
angles available.
NOTE: Not all DVDs have multiple angles available.
6. DVD/USB - Switches between DISC mode and USB mode.
7. L/R - Cycles through the different multiplex CD+G output
modes for canceling the vocals: MONO-LEFT, MONO-RIGHT,
STEREO. See the Operations section in this manual for detailed
instructions on canceling vocals on multiplex CD+G discs.
8. PROGRAM - Opens the Program Menu which lets you program
a custom playlist order of up to 16 tracks. See the Operations
section in this manual for detailed instructions on using the
Program Menu.
9. CLEAR - Erases numbers entered into a menu without closing
the menu.
10. AUDIO - Cycles between the available audio languages on
DVDs with multiple languages available.
NOTE: Not all DVDs have multiple languages available.
11. POWER - Turns Standby mode ON and OFF.
12. V-MODE - Cycles through the available video output modes:
RGB, YUV, P-SCAN. To change the video output mode
press
the V-MODE button until desired mode is selected.
13. DIRECT TRACK ACCESS (NUMBER) - For use whenever
number input is necessary. i.e. Jumping directly to tracks/
chapters, programming tracks in program mode, parental
password, etc. See the Operations section in this manual for
detailed instructions.
14. TIME - Opens up the GO TO menu which allows you to jump to
a certain time on DVDs, VCDs and CDs. See the Operations
section in this manual for detailed instructions on using the
GO TO option.
15. VIEW - Use this to enable SCAN mode, which cycles through
the first six seconds of each track on the disc. Press again
to resume normal playback.
Remote Control