Filter
Top Products
25
Setup Menu cont.
3. Dolby Digital Setup
Dual Mono - Select the speaker output. It is usually recommended that you stay in STEREO
mode for best results.
Stereo - Outputs audio in stereo.
L-Mono - Plays the Left side only through both Left and Right speaker outputs on a
Multiplex disc.
R-Mono - Plays the Right side only through both the Left and Right speaker outputs on a
Multiplex disc.
Mix-Mono - Plays virtual stereo with Left and Right Mono coming out of the Left and
Right speaker outputs.
Dynamic - Setting the compression allows you to play music at a lower volume without losing
the original quality of the sound. Great for late night use.
Full - Full-volume cinematic sound.
3/4 - Low compression.
1/2 - Medium compression for general use.
1/4 - High compression for quieter (late night) use.
OFF - No Compression.
4. Channel Delay - Use the arrow keys to set the delay for each channel, Center, Subwoofer, Left or
Right. Press ENTER to confirm settings and exit.
5. Equalizer - Set the EQ levels to presets to best suit your audio type:
EQ - Rock, Pop, Live, Dance, Techno, Classic, Soft.
Bass Boost - Increase the low end of your audio output.
Super Bass - Maximize the low end of your output.
Treble Boost - Increase the high end of your audio output.
6. 3D Processing - Choose your processing setting for your DVX-668K to best suit your complete
home theater system setup and arrangement.
Pro Logic II - Create a surround sound effect for your stereo audio.
Pro Logic II - Enable or disable Dolby Pro Logic II or set to AUTO.
Mode - Set the mode to best match your audio type: Music, Movie, Pro Logic, Auto.
Panorama - Enable or disable the output of audio to the left and right surround
speakers.
Dimension - Change the amount of sound in the rear speakers.
Center Width - Adjust how much of the left and right channel form the center channel.
Reverb Mode - Set the reverb levels to one of these preset modes to duplicate the echo effect
of each space: Concert, Living Room, Hall, Bathroom, Cave, Arena, Church
7. HDCD - Change the filter settings for HDCD discs to adjust sound quality.