Filter
Top Products
Internet Direct Connection (IDC)
CLP-380 Owner’s Manual
59
Basic Operation
Loading the Internet Setting Files
This procedure lets you make Internet settings by loading the files created on the special
Yamaha webpage to the instrument.
2. Call up the Internet Settings screen.
Hold down the [FILE/SONG SETTING] button, and press the [REC]
button.
3. Engage the Load mode.
Make sure that the USB storage device containing the saved Internet
setting file named “config.n21” is connected to the instrument, and then
use the A [–][+] buttons.
4. Start loading.
Press the B [+ (YES)] button to call up the confirmation message
(“Sure?-->”).
To proceed, press the B [+ (YES)] button again. An “Executing” message appears
and data loading starts. When loading is complete, a “Completed” message
appears for three seconds, followed by the Check the Connection screen. Please
proceed to “Checking the Connection” on page 60.
To cancel the loading, press the B [– (NO)] button instead of the B [+ (YES)]
button.
2
3
2
4
B
D
NO YES
A
C
Wireless Execute?-->
NetworkSearch
Internet Settings screen
B
D
NO YES
A
C
ConfigFile Execute?-->
Import
You can create the Internet setting
files (named “config.n21”) on the
special Yamaha webpage.
Yamaha recommends that you
back up the Internet setting files
(page 103).
TIP
TIP
B
D
NO YES
A
C
ConfigFile Sure?-->
Import