Filter
Top Products
Detailed settings for the voices [VOICE SETTING]
CLP-380 Owner’s Manual
88
Detailed Settings
You cannot set this parameter for the voice parts “Left” and “Left × Layer.”
See the procedure on page 80.
Setting range:
Room......................Simulates reverberation in a room.
Hall1.......................Simulates reverberation in a concert hall.
Hall2.......................Reverberation is slightly longer than that of
“Hall1.”
Stage......................Reverberation suitable for a solo instrument
sound.
Plate.......................Reverberation simulating that created by
vibration of a metal plate.
The reverb effect is not applied if the ReverbSend parameter is set to “0.”
See the procedure on page 80.
In Dual mode:
Setting range:
0 – 127
You cannot set this parameter for the voice parts “Left” and “Left × Layer.”
See the procedure on page 80.
Setting range:
Chorus................... Adds a rich, spacious sound.
Celeste ..................Adds swell and a spacious sound.
Flanger ..................Adds swell effects of an ascending or
descending jet plane.
See the procedure on page 80.
In Dual mode:
Setting range:
0 – 127
Setting the reverb type
[ReverbType]
Setting the reverb depth
[ReverbSend]*
TIP
B
D
NO YES
A
C
Main Set?-->
ReverbType Hall1
TIP
B
D
NO YES
A
C
Main Set?-->
ReverbSend 14
B
D
NO YES
A
C
MainxLayer Set?-->
ReverbSend(E.Piano1) 26
Voice for editing (Voice 1 or Voice 2)
Selecting the chorus type
[Chorus Type]
Setting the chorus depth
[ChorusSend]*
TIP
B
D
NO YES
A
C
Main Set?-->
ChorusType Chorus
B
D
NO YES
A
C
Main Set?-->
ChorusSend 48
B
D
NO YES
A
C
MainxLayer Set?-->
ChorusSend(E.Piano1) 72
Voice for editing (Voice 1 or Voice 2)