Filter
Top Products
19
3
Select the voice for the
right zone.
Press a voice selector to select
the voice for the right zone.
4
Select the voice for the
left zone.
Hold down [SPLIT] and press
a voice selector to select the
voice. (The voice indicator for
the currently selected left-zone
voice lights up while [SPLIT]
is held down.)
5
Terminating SPLIT
mode...
Press and release the [SPLIT]
button.
The SPLIT indicator goes
off.
Handling of EFFECTS
If both voices are set to their standard effects at the time you enter SPLIT mode, the
Clavinova will automatically select the effect and depth to be applied for the combination. In
all other cases, the Clavinova will set the effect as follows.
[Type]
a) If both voices are set to the same effect...
Each voice retains its original effect.
b) If effect for one voice only is OFF...
Each voice retains its original effect settings. One voice receives no effect; the other
receives the effect set up prior to entry into SPLIT mode.
c) If the two voices are set to different effects...
The effect setting for the right-hand voice is used for both voices. The effect setting for
the left voice is forced off until SPLIT mode terminates.
d) If you change the EFFECT type while SPLIT mode is in progress, the Clavinova will
apply the newly selected effect to both voices.
[Depth]
You can set the depth to any level using function F5.
CLP-811/611 Selecting and Playing Voices
Using the METRONOME
The CLP-811/611 includes a built-in metronome with adjustable tempo, volume and beat.
BRILLIANCE
REVERB EFFECT TOUCH
TRANSPOSE
MELLOW
NORMAL
BRIGHT
ROOM
HALL 1
HALL 2
STAGE
CHORUS
SYMPHONIC
TREMOLO
ECHO
HARD
MEDIUM
SOFT
FIXED
SONG
MEASURE
TEMPO
SPLIT
FUNCTION
MASTER VOLUME
TRANSPOSE SPLIT
BRILLIANCEREVERB EFFECT TOUCH
VARIATIONPIANO 1 PIANO 2 CLAVI.TONE E.PIANO1 E.PIANO2
VIBES STRINGS CHOIR BASS
HARPSI-
CHORD
PIPE
ORGAN
ORGAN
COMBINATION
METRONOME
TEMPO
–
/
NO +
/
YES
SONG
SELECT
START
/
STOP
REC
RECORDER
12
DEMO
/
PIANO SONG
MAX
MIN
1 2
Procedure
1
Switch on the metro-
nome and set the tempo.
Press the [METRO-
NOME] button.
The metronome comes
on and begins tapping.
Adjust the tempo.
Press TEMPO [▼][▲] as
necessary to set the tempo. You
can set to any value between
32 and 280. The default setting
is 120.
Adjust the metronome volume.
Hold down [METRONOME] and press [-/NO] or [+/YES] to adjust the
metronome volume. The screen continues to display the volume setting
while the button is held down. You can set to any value between 1 and 20;
the default is 10.
2
Switching off the metronome...
Press and release the [METRONOME] button.
The metronome goes off.
BRILLIANCE
REVERB EFFECT TOUCH
TEMPO
NORMAL
ROOM
MEDIUM
Animated metronome icon
BRILLIANCE
REVERB EFFECT TOUCH
TEMPO
NORMAL
ROOM
MEDIUM
Tempo
Metronome volume
You can also use function F7 to
set up the metronome. In
addition to volume setting, F7
also allows you to select a beat.
The metronome will generate the
corresponding beat pulse, and a
flashing beat display will appear
under the metronome icon. (See
page 32.)
Beat marker