Filter
Top Products
37
CLP-811/611 Configuration Functions (FUNCTION mode)
Parameters in Each Group
14.1/15.1 Voice (Voice settings)
• Voice selection
• DUAL mode ON/OFF status and voice combination
• The [F4.DualFunc.] settings (for each voice combination)
• SPLIT mode ON/OFF status and voice combination
• The [F5.SplitFunc.] settings (for each voice combination)
• REVERB type and depth
• EFFECT type and depth (for each voice)
• BRILLIANCE setting
• VARIATION ON/OFF status (for each voice)
• TOUCH setting
• All [F6.OrganEdit] settings
• All [F7.Metronome] settings
• The [F14.MicRevDpt] setting (CLP-811 only)
14.2/15.2 MIDI (MIDI settings)
All MIDI settings ([F13.MIDIFunc.] settings 13-1 to 13-6)
14.3/15.3 Tune (Tuning and temperament set-
tings)
• Current TRANSPOSE setting
• Keyboard fine tuning ([F1.Tune] setting)
• Key-by-key fine tuning ([F2.KTune] settings)
• Temperament selection ([F3.Scale] settings)
14.4/15.4 Pedal (Pedal settings)
• Left-pedal function ([F9.L.Pedal] setting)
• Damper-pedal depth ([F10.DamperDpt] setting)
• Number of damper-pedal levels ([F11.Damper] setting)
14.5/15.5 Display (Display mode)
Display mode ([F8.Display] setting)
• To reset all values to their factory defaults...
Switch the power OFF, then hold down the highest key on
the keyboard (key C7) and switch the power back on. Note
that this operation will also delete all recorded performance
data.
For a listing of the factory default values, see page 47.