Filter
Top Products
27
CLP-811/611 Configuration Functions (FUNCTION mode)
Function descriptions
F1.Tune (Keyboard fine tuning)
You use this function to fine-tune the pitch over
the entire keyboard. This function is useful, for
example, when you need to adjust tuning when
playing with other instruments.
1 To access this item, enter FUNCTION mode and
select main function F1.
2 The screen shows the current pitch (in hertz) for key
A3. You can adjust the pitch (in increments of about
0.2 hertz) by pressing [-/NO] or [+/YES]. The adjust-
ment automatically carries over to all keys on the
keyboard.
Values: 427.0 to 453.0 (hertz)
Default: 440.0 (hertz)
• Hertz: Frequency, in cycles per second; abbreviated as
“Hz”. The frequency of a sound wave determines its
pitch, with higher frequencies producing higher pitches.
NOTE
You can make the same adjustment directly from
the keyboard without entering [FUNCTION]
mode, as follows.
To raise the pitch (by about 0.2 Hz)...
Hold down the two lowest white keys (A-1 and B-1) and
hit any key from C3 to B3.
To lower the pitch (by about 0.2 Hz)...
Hold down the two lowest keys (A-1 and A
-1) and hit any
key from C3 to B3.
To reset to standard pitch...
Hold down the three lowest keys (A-1, A
-1, B-1) and hit
any key from C3 to B3.
NOTE
You can also adjust pitch in increments of about 1
Hz (without entering FUNCTION mode) as
follows.
To raise or lower the pitch...
Hold down keys A-1 and B-1 (the two lowest white keys)
or else A-1 and A
-1 (the two lowest keys), and press [-/
NO] or [+/YES].
To reset to standard pitch...
Hold down keys A-1 and B-1 or else A-1 and A
-1 and
press
[-/NO] and [+/YES] at the same time.
(Note that the screen will show the TUNE display when
you hold down keys A-1 and either A
-1 or B-1, and will
then return to normal display when these keys are re-
leased.)
F2.KTune (Key-by-key fine tuning)
This function lets you adjust the pitch of indi-
vidual keys, so that you can set up your own
customized scaling system (temperament). The
function also allows you to switch this custom-
ized scaling system OFF or ON at any time.
1 To access this item, enter FUNCTION mode and
proceed to main function F2.
2 The screen indicates whether the function is ON or
OFF. You can toggle the setting by pressing either
[-/NO] or [+/YES]. You must set the function ON if
you wish to adjust the tuning.
Values: ON, OFF
Default: OFF
• The ON/OFF setting determines whether this customized
tuning is used during play. Set ON to use the tuning, or
OFF to use standard tuning.
3 After setting the function ON, hit the key that you
want to tune.
The screen displays the name of the struck key.
4 You can now adjust the pitch for that key by pressing
[-/NO] or [+/YES]. Adjustment is in 1-cent incre-
ments, and is indicated as a relative value (“0”
produces standard pitch).
Values: -50,...,+50 (cents)
Default: 0 (standard pitch) for all keys
You can repeat this procedure (3 and 4) to adjust pitch
for as many keys as you like.
Cent: One-hundredth of a semitone. (100 cents = 1 semitone)
To reset fine tuning of all keys to “0”...
1 Press down the three lowest keys on the keyboard
(A-1, A
-1, and B-1) at the same time. The screen will
display the following.
2 Press [+/YES] to reset.
BRILLIANCE
REVERB EFFECT TOUCH
NORMAL
ROOM
MEDIUM
TEMPO
21
BRILLIANCE
REVERB EFFECT TOUCH
NORMAL
ROOM
MEDIUM
TEMPO
3 4
BRILLIANCE
REVERB EFFECT TOUCH
NORMAL
ROOM
MEDIUM
TEMPO
BRILLIANCE
REVERB EFFECT TOUCH
NORMAL
ROOM
MEDIUM
TEMPO
21